fleet.wikisort.org - Ship

Search / Calendar

The River-class destroyer (re-designated in 1913 as the E class) was a class of torpedo boat destroyer built for the Royal Navy at the turn of the 20th century, and which saw extensive service in World War I. The class introduced new features to destroyer design, placing a greater emphasis on seakeeping and endurance and less on a high maximum speed in good weather. All the ships were named after British and Irish rivers, and as such were the first Royal Navy destroyer class to be named systematically.

HMS Eden, a River-class destroyer
Class overview
NameRiver or E class
Operators Royal Navy
Preceded byD class
Succeeded byTribal class
Built19031905
In commission19031920
Completed36
Lost8
General characteristics
TypeDestroyer
Displacement535 long tons (544 t) to 570 long tons (580 t)[1]
Length221 ft (67 m) to 233 ft (71 m) (overall)[1]
Beam23 ft 6 in (7.16 m) to 23 ft 10.5 in (7.277 m)[1]
Draught7 ft 1 in (2.16 m)to 8 ft 0.5 in (2.451 m)[1]
Propulsion
  • 2 vertical triple expansion steam engines
  • 2 shafts
  • Except Eden, Stour and Test:
  • 2 Parsons steam turbines
  • 2 shafts
  • 7,000 ihp (5,200 kW) to 7,700 ihp (5,700 kW)[1]
Speed25.5 knots (29.3 mph; 47.2 km/h)[1]
Range1,620 nmi (3,000 km) to 1,870 nmi (3,460 km) at 11 kn, except Stour and Test, 3,000 nmi (5,556 km) at 13 kn.[1]
Complement70[1]
Armament
  • As designed:
  • 1 × QF 12 pdr 12 cwt Mark I on pedestal mountings P Mark I
  • 5 × QF 6-pdr 8 cwt naval gun
  • 2 × single tubes for 18-inch (450-mm) torpedoes

Genesis


The concept for the River class began in December 1900, with a request from John de Robeck, then the senior destroyer officer in the Mediterranean Fleet, for a new class of destroyer with a longer range than the existing "30-knotter" and "27-knotter" types. Robeck's specification called for a range of 1,650 nmi (3,056 km) at a sustained speed of 18 knots (33 km/h); the "30-knotter" could only make 1,400 nmi (2,593 km) at its cruising speed of 13 knots (24 km/h).[2]

Robeck also called for various modifications to destroyer design to help make ships more seaworthy, in particular keeping up their speed in adverse weather conditions. The most noticeable change would be to introduce a raised forecastle rather than an arched turtleback[lower-alpha 1] for the hull forward of the bridge, and that the bridge should be placed further aft to keep it clear of spray from waves breaking over the bow. Furthermore, he felt that destroyers should run their speed trials with a more realistic load of fuel and supplies. The "30-knotter" type might have a nominal speed of 30 knots, but even in very good weather this was never achieved in service.[4]

Other officers serving on Royal Navy destroyers made similar observations about their ships. Robeck's commanding officer, Admiral "Jackie" Fisher, drew a comparison with the German S90-class torpedo boat, which had impressed Royal Navy officers who had seen it.[5]

In July 1901 the Director of Naval Construction worked on sketch designs for future destroyers, which included many of the features Robeck and his colleagues advocated, as well as a heavier and more reliable kind of engine. The trials speed was initially be 27 knots (50 km/h), though further requirements for increased strength reduced the speed to 25.5 knots (47.2 km/h). While this speed seemed like a significant reduction, it would be measured with a realistic 95 tons of coal loaded on board, and the better seakeeping properties meant that the new ships would perform better than a "30-knotter" in any seas except for a flat calm.[6]


Design


View at stern and the three propeller shafts of HMS Eden, 1904 laying in the dry dock
View at stern and the three propeller shafts of HMS Eden, 1904 laying in the dry dock

As with other early British destroyer classes, the Admiralty invited specialist private firms to submit their own designs for destroyers which would meet the specification. The idea was to use the builders' knowledge of building small, fast, ships to help cram powerful machinery into a small hull. For this reason, details of the hull and internal arrangements differed between ships in the class.

Nevertheless, the River class can clearly be distinguished from previous destroyers because of its raised forecastle. Previous British designs that had a low "turtle-back" forecastle, which, although intended to clear the bows, caused them to dig in to the sea, resulting in a very wet conning position. The bridge was also further back than in previous destroyer models.

All ships were coal fired and all but three had triple expansion steam engines; Eden, Stour and Test were powered by steam turbines. Eden was given turbines to test their viability for future destroyer classes, with two propellers on each of her three shafts, to transmit the power at the high revolutions of the direct drive turbines, a feature of the earlier Turbinia.

By 1906 the Russo-Japanese War had shown that the 6-pounder gun was insufficiently effective, so the five 6-pounders in this class were replaced by three additional 12-pounders, creating an "all big gun" armament.[7]


Performance


With a general increase in size and more solid construction, the Rivers became the first truly oceangoing and useful torpedo boat destroyers in Royal Navy service.

Despite making only 25 knots (previous classes had made 27 to 30 knots (50 to 56 km/h) under the most favourable conditions), the increased seaworthiness meant that they could maintain this speed into a sea and that they remained workable and fightable at the same time. Notwithstanding a variety of design differences, all ships had either two broad funnels or two pairs of narrow funnels.

All ships surviving the war were sold out of service by late 1920.


Ships


HMS Welland
HMS Welland

Thirty-four ships were ordered - ten ships under the 1901-02 Programme, eight ships under the 1902-03 Programme (with one extra purchased when Palmers built it on speculation), and fifteen ships under the 1903-04 Programme; two additional vessels (also built on speculation) were purchased in 1909 under the 1908-09 Programme.


Notes


  1. A turtleback is an arched structure over the deck of a ship, normally at the ship's bow, to protect against reach seas.[3]

Citations


  1. Friedman 2009, pp.292–293.
  2. Friedman, p. 86
  3. "turtleback: Definitions". wordnik.com. Retrieved 6 July 2014.
  4. Friedman, p. 87
  5. Friedman, p. 88
  6. Friedman, pp. 88-89
  7. Gardiner and Chesneau, p. 99

References





Текст в блоке "Читать" взят с сайта "Википедия" и доступен по лицензии Creative Commons Attribution-ShareAlike; в отдельных случаях могут действовать дополнительные условия.

Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.

2019-2025
WikiSort.org - проект по пересортировке и дополнению контента Википедии